Back to Suspension Kits
MotoFab 2-Inch Leveling Lift Kit For 2004-2018 Ford F-150
This lift kit will raise the front of your F150 by a true 2″. Can be installed in about 1 1/2-2 hours and does not require strut/coil disassembly like other kits. They are CNC machined out of billet aluminum and then powdercoated black to match you factory suspension. The quality of this kit cannot even be compared to welded spacers that crack over time. These spacers are the strongest on the market and come with a 100% satisfaction guarantee and a lifetime warranty. It will come to you complete with all the hardware and instructions. Please note: Lift spacer thickness and lift is not a 1 to 1 ratio due to the suspension geometry.
- Will Raise the front of your F150 by a true 2″
- Motofab Lifts are CNC machined out of billet aluminum then powdercoated black to match your factory suspension.
- Can be installed in about 1 1/2-2 hours and does not require strut/coil disassembly like other kits.
- Made In The USA and a Lifetime warranty
- Fits 2004-2018 F150 2WD & 4WD
Categories: Suspension Kits, Suspension Kits, Suspension Kits
Tag: Leveling Kit
Related products
Rough Country 6-inch Lift Kit w/ N3 Shocks 2014 F150 4WD
Give your 2014 Ford F-150 an aggressive new look and unparalleled off-road performance with Rough Country's 6-inch Suspension Lift. This all-inclusive kit features everything needed to take your Ford off the freeway and into the fields. Featuring a set of durable lifted knuckles and strut spacers, you'll gain enough ride height to run up to 35" tires! A set of differential drop brackets, sway-bar drop brackets, brake line brackets, and a drive shaft spacer help keep everything at an optimum angle for a factory-like ride, even after lifting. A 1/4-inch thick plate steel front and rear cross member bring uncompromised strength and good looks to your truck, featuring a laser-cut "RCX" logo and an easy-to-install design. Our Fabricated Rear Blocks offer considerably more strength than their cast iron counterparts, and were specifically engineered by Rough Country to prevent against axle-wrap. A set of Rough Country's premiere off-road shock absorbers - N3 - are also included in this kit, With a durable 18mm spring-loaded piston rod and faster-cooling 54mm shock body, this shock offers up to 36kN Tensile Strength for a long lifespan of impressive vibration dampening.
Features:
- Track width remains the same as factory
- Increased ground clearance
- Levels the front with the rear of the vehicle
- Fabricated blocks are stronger and offer a longer lifespan than cast blocks.
- Specially designed anti-axle wrap rear blocks maintain stock ride quality while eliminating common lift block problem.
- Requires minor cutting and drilling.
- 9" wide wheel is recommended.
- Lifted knuckles
- Strut spacers
- Front crossmember
- Rear crossmember
- Sway-bar drop brackets
- Differential drop brackets
- Brake line brackets
- Driveshaft spacer
- Hardware
- 5.5 in fabricated anti-wrap lift blocks
- Brake line relocation brackets
- U-bolts
- Hardware
- (2) Rear premium N3 shocks
- Est. Install Time 8-10 hours
- 6-Inch Lift Kit
- Recommended Tire Size 35x12.50 R18
- Recommended Wheel Backspacing 4.5in
- Fitment: 2014 Ford F-150 4x4
Rough Country 6-inch Lift Kit w/ Performance 2.2 Shocks 2009-2010 F-150 4WD
Give your 2009-2013 Ford F-150 an aggressive new look and unparalleled off-road performance with Rough Country's 6-inch Suspension Lift. This all-inclusive kit features everything needed to take your Ford off the freeway and into the fields. Featuring a set of durable lifted knuckles and strut spacers or N2.0 lifted struts, you'll gain enough ride height to run up to 35-inch tires! A set of differential drop brackets, sway-bar drop brackets, brake line brackets, and a drive shaft spacer help keep everything at an optimum angle for a factory-like ride, even after lifting. A 1/4-inch thick plate steel front and rear cross member bring uncompromised strength and good looks to your truck, featuring a laser-cut "RC" logo and an easy-to-install design. Our 4-inch Fabricated Rear Blocks offer considerably more strength than their cast iron counterparts, and were specifically engineered by Rough Country to prevent against axle-wrap. Improve your on and off-road ride quality with Rough Country's premium N3 shocks! These 10-stage variable valving, high-pressure Nitrogen charged shocks offer a fantastic blend of off-road action and smooth highway ride quality. With a durable 18mm spring-loaded piston rod and faster-cooling 54mm shock body, this shock offers up to 36kN Tensile Strength for a long lifespan of impressive vibration dampening.
Features:
- Track width remains the same as factory
- Increased ground clearance
- Levels the front with the rear of the vehicle
- Fabricated rear blocks are stronger and offer a longer lifespan than cast blocks.
- Specially designed anti-axle wrap rear blocks maintain stock ride quality while eliminating common lift block problem.
- Optional Lifted front struts help maintain smooth, factory-like ride
- Optional Front struts are structurally engineered for lifted applications
- Optional Front struts are lifted 6-inches, eliminating the need for strut spacers
- Requires minor cutting and drilling.
- 9-inch wide wheels are recommended.
- Lifted knuckles
- Upper strut spacers
- Front crossmember
- Rear crossmember
- Sway-bar drop brackets
- Differential drop brackets
- Brake line brackets
- Driveshaft spacer
- Hardware
- 5.5in fabricated anti-wrap lift blocks
- Brake line relocation brackets
- U-bolts
- Hardware
- (2) Rear premium N3 shocks
- Est. Install Time 8-10 hours
- Recommended Tire Size 35x12.50 R18
- Recommended Wheel Backspacing 4.5" - 5"
- Fitment: 2009-2010 Ford F-150 4x4
Rough Country 6-inch Lift Kit w/ N3 Shocks 2011-2013 F150 4WD
Give your 2011-2013 Ford F-150 an aggressive new look and unparalleled off-road performance with Rough Country's 6-inch Suspension Lift. This all-inclusive kit features everything needed to take your Ford off the freeway and into the fields. Featuring a set of durable lifted knuckles and strut spacers or N2.0 lifted struts, you'll gain enough ride height to run up to 35-inch tires! A set of differential drop brackets, sway-bar drop brackets, brake line brackets, and a drive shaft spacer help keep everything at an optimum angle for a factory-like ride, even after lifting. A 1/4-inch thick plate steel front and rear cross member bring uncompromised strength and good looks to your truck, featuring a laser-cut "RC" logo and an easy-to-install design. Our 4-inch Fabricated Rear Blocks offer considerably more strength than their cast iron counterparts, and were specifically engineered by Rough Country to prevent against axle-wrap. Improve your on and off-road ride quality with Rough Country's premium N3 shocks! These 10-stage variable valving, high-pressure Nitrogen charged shocks offer a fantastic blend of off-road action and smooth highway ride quality. With a durable 18mm spring-loaded piston rod and faster-cooling 54mm shock body, this shock offers up to 36kN Tensile Strength for a long lifespan of impressive vibration dampening.
Features:
- Track width remains the same as factory
- Increased ground clearance
- Levels the front with the rear of the vehicle
- Fabricated rear blocks are stronger and offer a longer lifespan than cast blocks.
- Specially designed anti-axle wrap rear blocks maintain stock ride quality while eliminating common lift block problem.
- Optional Lifted front struts help maintain smooth, factory-like ride
- Optional Front struts are structurally engineered for lifted applications
- Optional Front struts are lifted 6-inches, eliminating the need for strut spacers
- Requires minor cutting and drilling.
- 9-inch wide wheels are recommended.
- Lifted knuckles
- Upper strut spacers
- Front crossmember
- Rear crossmember
- Sway-bar drop brackets
- Differential drop brackets
- Brake line brackets
- Driveshaft spacer
- Hardware
- 5.5 in fabricated anti-wrap lift blocks
- Brake line relocation brackets
- U-bolts
- Hardware
- (2) Rear premium N3 shocks
- Est. Install Time 8-10 hours
- Recommended Tire Size 35x12.50 R18
- Recommended Wheel Backspacing 4.5" - 5"
- Fitment: 2011-2013 Ford F-150 4x4
Rough Country 2-Inch Leveling Kit W/ N2.0 Shocks 2009-2013 F-150 4WD/2WD
Level your F-150 with Rough Country's new, head-turning Aluminum Leveling Spacer. This easy to install, innovative Aluminum Spacer combines great looks and strength, while providing 2-inches of lift. This new spacer features aircraft quality, T6061 Billet Aluminum offering enhanced durability against elements like rain and rust. Rough Country's new spacer design has a driver and passenger side pattern that allows for clearance between the upper control arm and the strut. This simple design is easy to install with a 100% bolt-on installation process that can be done in mere hours. Best of all, this simple kit levels the front of your truck with the rear, giving your vehicle an overall more aggressive appearance and plenty of room for up to 35-inch tires.
Features:
- Easy bolt-on installation
- Maintains factory ride quality
- Increased ground clearance
- Levels the front with the rear of the vehicle
- No need to disassemble your struts to install
- SKU: 568.20 includes Front Upper Strut Spacers w/Rear N2.0 Shocks
- SKU: 50004 includes N2.0 Lifted Front Struts w/Rear N2.0 Shocks
- (2) Strut extensions (SKU: 568.20)
- Hardware
- 1" lift blocks
- U-bolts
- Hardware
- (2) Rear Premium N2.0 series
- Est. Install Time 2-3 hours
- Recommended Tire Size 35x12.50
- Recommended Wheel Backspacing Factory